| Variants |
|
|---|---|
| Reference Standards | ASTM A182 – ASME SA182 – ‘Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings’
ASME B16.11 – ‘Forged Fittings Socket – Welding and Threated’ MSS SP-43 – ‘Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications’ |
| Dimensions | Diameter: 1/8″ to 4″
Pressure Class: 3000# & 6000# |
SW Tees & Crosses – 3000 lbs |
|||||
|---|---|---|---|---|---|
| Nominal Pipe Size | Socket Bore Diameter2 (B) |
Bore Diameter2 (D) |
Socket Wall Thickness1 (C) |
Center to Bottom of Socket (A) |
Depth of Socket3 (J) |
| 1/8″ | 11.2 10.8 |
7.6 6.1 |
3.18 3.18 |
11.0 | 9.5 |
| 1/4″ | 14.6 14.2 |
10.0 8.5 |
3.78 3.30 |
11.0 | 9.5 |
| 3/8″ | 18.0 17.6 |
13.3 11.8 |
4.01 3.50 |
13.5 | 9.5 |
| 1/2″ | 22.2 21.8 |
16.6 15.0 |
4.67 4.09 |
15.5 | 9.5 |
| 3/4″ | 27.6 27.2 |
21.7 20.2 |
4.90 4.27 |
19.0 | 12.5 |
| 1″ | 34.3 33.9 |
27.4 25.9 |
5.69 4.98 |
22.5 | 12.5 |
| 1 1/4″ | 43.1 42.7 |
35.8 34.3 |
6.07 5.28 |
27.0 | 12.5 |
| 1 1/2″ | 49.2 48.8 |
41.6 40.1 |
6.35 5.54 |
32.0 | 12.5 |
| 2″ | 61.7 61.2 |
53.3 51.7 |
6.93 6.04 |
38.0 | 16.0 |
| 2 1/2″ | 74.4 73.9 |
64.2 61.2 |
8.76 7.67 |
41.0 | 16.0 |
| 3″ | 90.3 89.8 |
79.4 76.4 |
9.52 9.30 |
57.0 | 16.0 |
| 4″ | 115.7 115.2 |
103.8 100.7 |
10.69 9.35 |
66.5 | 16.0 |
SW Tees & Crosses – 6000 lbs |
|||||
| Nominal Pipe Size | Socket Bore Diameter2 (B) |
Bore Diameter2 (D) |
Socket Wall Thickness1 (C) |
Center to Bottom of Socket (A) |
Depth of Socket3 (J) |
| 1/8″ | 11.2 10.8 |
4.8 3.2 |
3.96 3.43 |
11.0 | 9.5 |
| 1/4″ | 14.6 14.2 |
7.1 5.6 |
4.60 4.01 |
13.5 | 9.5 |
| 3/8″ | 18.0 17.6 |
9.9 8.4 |
5.03 4.37 |
15.5 | 9.5 |
| 1/2″ | 22.2 21.8 |
12.5 11.0 |
5.97 5.18 |
19.0 | 9.5 |
| 3/4″ | 27.6 27.2 |
16.3 14.8 |
6.96 6.04 |
22.5 | 12.5 |
| 1″ | 34.3 33.9 |
21.5 19.9 |
7.92 6.93 |
27.0 | 12.5 |
| 1 1/4″ | 43.1 42.7 |
30.2 28.7 |
7.92 6.93 |
32.0 | 12.5 |
| 1 1/2″ | 49.2 48.8 |
34.7 33.2 |
8.92 7.80 |
38.0 | 12.5 |
| 2″ | 61.7 61.2 |
43.6 42.1 |
10.92 9.50 |
41.0 | 16.0 |
| 2 1/2″ | 74.4 73.9 |
– – |
– – |
– | 16.0 |
| 3″ | 90.3 89.8 |
– – |
– – |
– | 16.0 |
| 4″ | 115.7 115.2 |
– – |
– – |
– | 16.0 |
1 The lower and upper values for each dimension correspond respectively to the required average and minimum thicknesses. The average thickness may not be less than the stated value. Minimum values are permitted in limited areas.
2 The lower and upper values for each dimension correspond respectively to the minimum and maximum tolerances.
Dimensions are in millimetres.
Source: ASME B16.11 – 2009
Threaded Tees & Crosses – 3000 lbs |
|||
|---|---|---|---|
| Nominal Pipe Size | Center to End (A) |
Outside Diameter (H) |
Minimum Wall Thickness (G) |
| 1/8″ | 21 | 22 | 3.18 |
| 1/4″ | 25 | 25 | 3.30 |
| 3/8″ | 28 | 33 | 3.51 |
| 1/2″ | 33 | 38 | 4.09 |
| 3/4″ | 38 | 46 | 4.32 |
| 1″ | 44 | 56 | 4.98 |
| 1 1/4″ | 51 | 62 | 5.28 |
| 1 1/2″ | 60 | 75 | 5.56 |
| 2″ | 64 | 84 | 7.14 |
| 2 1/2″ | 83 | 102 | 7.65 |
| 3″ | 95 | 121 | 8.84 |
| 4″ | 114 | 152 | 11.18 |
Threaded Tees & Crosses – 6000 lbs |
|||
| Nominal Pipe Size | Center to End (A) |
Outside Diameter (H) |
Minimum Wall Thickness (G) |
| 1/8″ | 25 | 25 | 6.35 |
| 1/4″ | 28 | 33 | 6.60 |
| 3/8″ | 33 | 38 | 6.98 |
| 1/2″ | 38 | 46 | 8.15 |
| 3/4″ | 44 | 56 | 8.53 |
| 1″ | 51 | 62 | 9.93 |
| 1 1/4″ | 60 | 75 | 10.59 |
| 1 1/2″ | 64 | 84 | 11.07 |
| 2″ | 83 | 102 | 12.09 |
| 2 1/2″ | 95 | 121 | 15.29 |
| 3″ | 106 | 146 | 16.64 |
| 4″ | 114 | 152 | 18.67 |
Dimensions are in millimetres.
Source: ASME B16.11 – 2009
