| Déclinaisons |
|
|---|---|
| Normes de références | ASTM A182 – ASME SA182 – ‘Forged or Rolled Alloy and STainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service’ ASTM A105 – ASME SA105 – ‘Carbon Steel Forgings for Piping Applications’ ASTM A350 – ASME SA350 – ‘Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components’ ASTM A181 – ASME SA181 – ‘Carbon Steel Forgings, for General-Purpose Piping’ ASTM B564 – ASME SB564 – ‘Nickel Alloy Forgings’ ASTM B381 – ASME SB381 – ‘Titanium and Titanium Alloy Forgings’ ASME B16.11 – ‘Forged Fittings Socket – Welding and Threated’ |
| Dimensions | Diamètre : 1/8″ à 4″
Classe de pression : 3000# & 6000# |
Tés & Croix SW 3000Lbs |
|||||
|---|---|---|---|---|---|
| Nominal Pipe Size | Socket Bore Diameter2 (B) |
Bore Diameter2 (D) |
Socket Wall Thickness1 (C) |
Center to Bottom of Socket (A) |
Depth of Socket3 (J) |
| 1/8″ | 11.2 10.8 |
7.6 6.1 |
3.18 3.18 |
11.0 | 9.5 |
| 1/4″ | 14.6 14.2 |
10.0 8.5 |
3.78 3.30 |
11.0 | 9.5 |
| 3/8″ | 18.0 17.6 |
13.3 11.8 |
4.01 3.50 |
13.5 | 9.5 |
| 1/2″ | 22.2 21.8 |
16.6 15.0 |
4.67 4.09 |
15.5 | 9.5 |
| 3/4″ | 27.6 27.2 |
21.7 20.2 |
4.90 4.27 |
19.0 | 12.5 |
| 1″ | 34.3 33.9 |
27.4 25.9 |
5.69 4.98 |
22.5 | 12.5 |
| 1 1/4″ | 43.1 42.7 |
35.8 34.3 |
6.07 5.28 |
27.0 | 12.5 |
| 1 1/2″ | 49.2 48.8 |
41.6 40.1 |
6.35 5.54 |
32.0 | 12.5 |
| 2″ | 61.7 61.2 |
53.3 51.7 |
6.93 6.04 |
38.0 | 16.0 |
| 2 1/2″ | 74.4 73.9 |
64.2 61.2 |
8.76 7.67 |
41.0 | 16.0 |
| 3″ | 90.3 89.8 |
79.4 76.4 |
9.52 9.30 |
57.0 | 16.0 |
| 4″ | 115.7 115.2 |
103.8 100.7 |
10.69 9.35 |
66.5 | 16.0 |
Tés & Croix SW 6000Lbs |
|||||
| Nominal Pipe Size | Socket Bore Diameter2 (B) |
Bore Diameter2 (D) |
Socket Wall Thickness1 (C) |
Center to Bottom of Socket (A) |
Depth of Socket3 (J) |
| 1/8″ | 11.2 10.8 |
4.8 3.2 |
3.96 3.43 |
11.0 | 9.5 |
| 1/4″ | 14.6 14.2 |
7.1 5.6 |
4.60 4.01 |
13.5 | 9.5 |
| 3/8″ | 18.0 17.6 |
9.9 8.4 |
5.03 4.37 |
15.5 | 9.5 |
| 1/2″ | 22.2 21.8 |
12.5 11.0 |
5.97 5.18 |
19.0 | 9.5 |
| 3/4″ | 27.6 27.2 |
16.3 14.8 |
6.96 6.04 |
22.5 | 12.5 |
| 1″ | 34.3 33.9 |
21.5 19.9 |
7.92 6.93 |
27.0 | 12.5 |
| 1 1/4″ | 43.1 42.7 |
30.2 28.7 |
7.92 6.93 |
32.0 | 12.5 |
| 1 1/2″ | 49.2 48.8 |
34.7 33.2 |
8.92 7.80 |
38.0 | 12.5 |
| 2″ | 61.7 61.2 |
43.6 42.1 |
10.92 9.50 |
41.0 | 16.0 |
| 2 1/2″ | 74.4 73.9 |
– – |
– – |
– | 16.0 |
| 3″ | 90.3 89.8 |
– – |
– – |
– | 16.0 |
| 4″ | 115.7 115.2 |
– – |
– – |
– | 16.0 |
1 Les valeurs inférieures et supérieures pour chaque dimension sont respectivement les épaisseurs moyennes et minimales requises. L’épaisseur moyenne ne peut être inférieure à la valeur mentionnée. Les valeurs minimales sont autorisées dans des zones limitées.
2 Les valeurs inférieures et supérieures pour chaque dimension sont respectivement les tolérances minimales et maximales.
Les dimensions sont en millimètres
Source : ASME B16.11 – 2009
Tés & Croix filetes 3000Lbs |
|||
|---|---|---|---|
| Nominal Pipe Size | Center to End (A) |
Outside Diameter (H) |
Minimum Wall Thickness (G) |
| 1/8″ | 21 | 22 | 3.18 |
| 1/4″ | 25 | 25 | 3.30 |
| 3/8″ | 28 | 33 | 3.51 |
| 1/2″ | 33 | 38 | 4.09 |
| 3/4″ | 38 | 46 | 4.32 |
| 1″ | 44 | 56 | 4.98 |
| 1 1/4″ | 51 | 62 | 5.28 |
| 1 1/2″ | 60 | 75 | 5.56 |
| 2″ | 64 | 84 | 7.14 |
| 2 1/2″ | 83 | 102 | 7.65 |
| 3″ | 95 | 121 | 8.84 |
| 4″ | 114 | 152 | 11.18 |
Tés & Croix filetes 6000Lbs |
|||
| Nominal Pipe Size | Center to End (A) |
Outside Diameter (H) |
Minimum Wall Thickness (G) |
| 1/8″ | 25 | 25 | 6.35 |
| 1/4″ | 28 | 33 | 6.60 |
| 3/8″ | 33 | 38 | 6.98 |
| 1/2″ | 38 | 46 | 8.15 |
| 3/4″ | 44 | 56 | 8.53 |
| 1″ | 51 | 62 | 9.93 |
| 1 1/4″ | 60 | 75 | 10.59 |
| 1 1/2″ | 64 | 84 | 11.07 |
| 2″ | 83 | 102 | 12.09 |
| 2 1/2″ | 95 | 121 | 15.29 |
| 3″ | 106 | 146 | 16.64 |
| 4″ | 114 | 152 | 18.67 |
Les dimensions sont en millimètres
Source : ASME B16.11 – 2009
