Slip-On

Dimensions	Diameter: 1/2″ to 24″ Pressure Class: 150# – 300# – 600# – 1500#Schedules : SCH10S – SCH40S – SCH80S – SCH160 See detailed dimensions below.
Variants	Finishes: Raised face (RF) – Flat face (FF) – RTJ – … Variants: Long Welding Neck – Reducing Welding neck – Orifice Welding Neck
Reference Standards	ASTM A182 – ASME SA182 – ‘Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings’ ASME B16.5 – ‘Pipe Flanges and Flanged Fittings’ ASME B16.36 – ‘Orifice Flanges’ ASME B16.47 – ‘Large Diameter Steel Flanges NPS26 Through NPS60’ MSS SP-6 – ‘Standard Finishes for Contact Faces of Pipe Flanges and Connecting End Flanges of Valves and Fittings’

Dimensions

Diameter: 1/2″ to 24″
Pressure Class: 150# – 300# – 600# – 1500#Schedules : SCH10S – SCH40S – SCH80S – SCH160

See detailed dimensions below.

Variants

Finishes: Raised face (RF) – Flat face (FF) – RTJ – …
Variants: Long Welding Neck – Reducing Welding neck – Orifice Welding Neck

Reference Standards

ASTM A182 – ASME SA182 – ‘Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings’

ASME B16.5 – ‘Pipe Flanges and Flanged Fittings’
ASME B16.36 – ‘Orifice Flanges’
ASME B16.47 – ‘Large Diameter Steel Flanges NPS26 Through NPS60’

MSS SP-6 – ‘Standard Finishes for Contact Faces of Pipe Flanges and Connecting End Flanges of Valves and Fittings’

150Lbs – 300Lbs – 600Lbs

The tables below show the most common dimensions and are not exhaustive.

150 LBS

							Drilling
Nominal Bore	Dia. (D)	Thick. (E)	Dia. (F)	Dia. (B)	Dia. (A)	Height¹ (H)	Nbr	Holes	Dia. (C)
1/2″	90	9.6	35.05	30	22.2	14	4	15.87	60.3
3/4″	100	11.2	42.93	38	27.7	14	4	15.87	69.9
1″	110	12.7	50.80	49	34.5	16	4	15.87	79.4
1 ^1/4″	115	14.3	63.50	59	43.2	19	4	15.87	88.9
1 ^1/2″	125	15.9	73.15	65	49.5	21	4	15.87	98.4
2″	150	17.5	91.95	78	61.9	24	4	19.05	120.7
2 ^1/2″	180	20.7	104.65	90	74.6	27	4	19.05	139.7
3″	190	22.3	127.00	108	90.7	29	4	19.05	152.4
3 ^1/2″	215	22.3	139.70	122	103.4	30	8	19.05	177.8
4″	230	22.3	157.22	135	116.1	32	8	19.05	190.5
5″	255	22.3	185.67	164	143.8	35	8	22.22	215.9
6″	280	23.9	215.90	192	170.7	38	8	22.22	241.3
8″	345	27.0	269.75	246	221.5	43	8	22.22	298.5
10″	405	28.6	323.85	305	276.2	48	12	25.40	362.0
12″	485	30.2	381.00	365	327.0	54	12	25.40	431.8
14″	535	33.4	412.75	400	359.2	56	12	28.57	476.3
16″	595	35.0	469.90	457	410.5	62	16	28.57	539.8
18″	635	38.1	533.40	505	461.8	67	16	31.75	577.9
20″	700	41.3	584.20	559	513.1	71	20	31.75	635.0
24″	815	46.1	692.15	663	616.0	81	20	34.92	749.3

¹ 1.6 mm raised face not included in dimensions E & H.

Dimensions are in millimetres.
Source : ASME B16.5 – 2007

300 LBS

							Drilling
Nominal Bore	Dia. (D)	Thick. (E)	Dia. (F)	Dia. (B)	Dia. (A)	Height¹ (H)	Nbr	Holes	Dia. (C)
1/2″	21.3	12.7	35.05	38	22.2	21	4	15.87	66.7
3/4″	26.7	14.3	42.93	48	27.7	24	4	19.05	82.6
1″	33.4	15.9	50.80	54	34.5	25	4	19.05	88.9
1 ^1/4″	42.2	17.5	63.50	64	43.2	25	4	19.05	98.4
1 ^1/2″	48.3	19.1	73.15	70	49.5	29	4	22.22	114.3
2″	60.3	20.7	91.95	84	61.9	32	8	19.05	127.0
2 ^1/2″	73.0	23.9	104.65	100	74.6	37	8	22.22	149.2
3″	88.9	27.0	127.00	117	90.7	41	8	22.22	168.3
3 ^1/2″	101.6	28.6	139.70	133	103.4	43	8	22.22	184.2
4″	114.3	30.2	157.22	146	116.1	46	8	22.22	200.0
5″	141.3	33.4	185.67	178	143.8	49	8	22.22	235.0
6″	168.3	35.0	215.90	206	170.7	51	12	22.22	269.9
8″	219.1	39.7	269.75	260	221.5	60	12	25.40	330.2
10″	273.0	46.1	323.85	321	276.2	65	16	28.57	387.4
12″	323.8	49.3	381.00	375	327.0	71	16	31.75	450.8
14″	355.6	52.4	412.75	425	359.2	75	20	31.75	514.4
16″	406.4	55.6	469.90	483	410.5	81	20	34.92	571.5
18″	457.0	58.8	533.40	533	461.8	87	24	34.92	628.6
20″	508.0	62.0	584.2td>	587	513.1	94	24	34.92	685.8
24″	610.0	68.3	692.15	702	616.0	105	24	41.27	812.8

¹ 1.6 mm raised face not included in dimensions E & H.

Dimensions are in millimetres.
Source : ASME B16.5 – 2007

600 LBS

							Drilling
Nominal Bore	Dia. (D)	Thick. (E)	Dia. (F)	Dia. (B)	Dia. (A)	Height¹ (H)	Nbr	Holes	Dia. (C)
1/2″	21.3	14.3	35.05	38	22.2	22	4	15.87	66.7
3/4″	26.7	15.9	42.93	48	27.7	25	4	19.05	82.6
1″	33.4	17.5	50.80	54	34.5	27	4	19.05	88.9
1 ^1/4″	42.2	20.7	63.50	64	43.2	29	4	19.05	98.4
1 ^1/2″	48.3	22.3	73.15	70	49.5	32	4	22.22	114.3
2″	60.3	25.4	91.95	84	61.9	37	8	19.05	127.0
2 ^1/2″	73.0	28.6	104.65	100	74.6	41	8	22.22	149.2
3″	88.9	31.8	127.00	117	90.7	46	8	22.22	168.3
3 ^1/2″	101.6	35.0	139.70	133	103.4	49	8	25.40	184.2
4″	114.3	38.1	157.22	152	116.1	54	8	25.40	215.9
5″	141.3	44.5	185.67	189	143.8	60	8	28.57	266.7
6″	168.3	47.7	215.90	222	170.7	67	12	28.57	292.1
8″	219.1	55.6	269.75	273	221.5	76	12	31.75	349.2
10″	273.0	63.5	325.85	343	276.2	86	16	34.92	431.8
12″	323.8	66.7	381.00	400	327.0	92	20	34.92	489.0
14″	355.6	69.9	412.75	432	359.2	94	20	38.10	527.0
16″	406.4	76.2	469.90	495	410.5	106	20	41.27	603.2
18″	457.0	82.6	533.40	546	461.8	117	20	44.45	654.0
20″	508.0	88.9	584.20	610	513.1	127	24	44.45	723.9
24″	610.0	101.6	692.15	718	616.0	140	24	50.80	838.2

¹ 6.4 mm raised face not included in dimensions E & H.

Dimensions are in millimetres.
Source : ASME B16.5 – 2007

150Lbs – 300Lbs – 600Lbs

150 LBS

300 LBS

600 LBS

Related products