| Dimensions | Diamètre : 1/2″ à 24″
Classe de pression : 150# – 300# – 600# – 1500# Schedules : SCH10S – SCH40S – SCH80S – SCH160 |
|---|---|
| Déclinaisons |
|
| Normes de références | ASTM A182 – ASME SA182 – ‘Forged or Rolled Alloy and STainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service’ ASTM A105 – ASME SA105 – ‘Carbon Steel Forgings for Piping Applications’ ASTM A181 – ASME SA181 – ‘Carbon Steel Forgings, for General-Purpose Piping’ ASTM B564 – ASME SB564 – ‘Nickel Alloy Forgings’ ASTM B381 – ASME SB381 – ‘Titanium and Titanium Alloy Forgings’ ASME B16.5 – ‘Pipe Flanges and Flanged Fittings’ MSS SP-6 – ‘Standard Finishes for Contact Faces of Pipe Flanges and Connecting End Flanges of Valves and Fittings’ |
150Lbs – 300Lbs – 600Lbs
Les tableaux ci-dessous reprennent les dimensions les plus courantes, mais ne sont pas exhaustifs.
150 LBS
| Drilling | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Nominal Bore | Dia. (D) |
Thick. (E) |
Dia. (F) |
Dia. (B) |
Dia. (A) |
Height1 (H) |
Nbr | Holes | Dia. (C) |
| 1/2″ | 90 | 11.2 | 35.05 | 30 | 22.2 | 14 | 4 | 15.87 | 60.3 |
| 3/4″ | 100 | 12.7 | 42.92 | 38 | 27.7 | 14 | 4 | 15.87 | 69.9 |
| 1″ | 110 | 14.3 | 50.80 | 49 | 34.5 | 16 | 4 | 15.87 | 79.4 |
| 1 1/4″ | 115 | 15.9 | 63.50 | 59 | 43.2 | 19 | 4 | 15.87 | 88.9 |
| 1 1/2″ | 125 | 17.5 | 73.15 | 65 | 49.5 | 21 | 4 | 15.87 | 98.4 |
| 2″ | 150 | 19.1 | 91.94 | 78 | 61.9 | 24 | 4 | 19.05 | 120.7 |
| 2 1/2″ | 180 | 22.3 | 104.65 | 90 | 74.6 | 27 | 4 | 19.05 | 139.7 |
| 3″ | 190 | 23.9 | 127.00 | 108 | 90.7 | 29 | 4 | 19.05 | 152.4 |
Raised face de 1,6mm non incluse dans les dimensions E & H
Voir ci-dessous pour la dimension A2
Les dimensions sont en millimètres
Source : ASME B16.5 – 2007
300 LBS
| Drilling | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Nominal Bore | Dia. (D) |
Thick. (E) |
Dia. (F) |
Dia. (B) |
Dia. (A) |
Height1 (H) |
Nbr | Holes | Dia. (C) |
| 1/2″ | 95 | 12.7 | 35.05 | 38 | 22.2 | 21 | 4 | 15.87 | 66.7 |
| 3/4″ | 115 | 14.3 | 42.92 | 48 | 27.7 | 24 | 4 | 19.05 | 82.6 |
| 1″ | 125 | 15.9 | 50.80 | 54 | 34.5 | 25 | 4 | 19.05 | 88.9 |
| 1 1/4″ | 135 | 17.5 | 63.50 | 64 | 43.2 | 25 | 4 | 19.05 | 98.4 |
| 1 1/2″ | 155 | 19.1 | 73.15 | 70 | 49.5 | 29 | 4 | 22.22 | 114.3 |
| 2″ | 165 | 20.7 | 91.94 | 84 | 61.9 | 32 | 8 | 19.05 | 127.0 |
| 2 1/2″ | 190 | 23.9 | 104.65 | 100 | 74.6 | 37 | 8 | 22.22 | 149.2 |
| 3″ | 210 | 27.0 | 127.00 | 117 | 90.7 | 41 | 8 | 22.22 | 168.3 |
Raised face de 1,6mm non incluse dans les dimensions E & H
Voir ci-dessous pour la dimension A2
Les dimensions sont en millimètres
Source : ASME B16.5 – 2007
600 LBS
| Drilling | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Nominal Bore | >Dia. (D) |
Thick. (E) |
Dia. (F) |
Dia. (B) |
Dia. (A) |
Height1 (H) |
Nbr | Holes | Dia. (C) |
| 1/2″ | 95 | 14.3 | 35.05 | 38 | 22.2 | 22 | 4 | 15.87 | 66.7 |
| 3/4″ | 115 | 15.9 | 42.92 | 48 | 27.7 | 25 | 4 | 19.05 | 82.6 |
| 1″ | 125 | 17.5 | 50.80 | 54 | 34.5 | 27 | 4 | 19.05 | 88.9 |
| 1 1/4″ | 135 | 20.7 | 63.50 | 64 | 43.2 | 29 | 4 | 19.05 | 98.4 |
| 1 1/2″ | 155 | 22.3 | 73.15 | 70 | 49.5 | 32 | 4 | 22.22 | 114.3 |
| 2″ | 165 | 25.4 | 91.94 | 84 | 61.9 | 37 | 8 | 19.05 | 127.0 |
| 2 1/2″ | 190 | 28.6 | 104.65 | 100 | 74.6 | 41 | 8 | 22.22 | 149.2 |
| 3″ | 210 | 31.8 | 127.00 | 117 | 90.7 | 46 | 8 | 22.22 | 168.3 |
Raised face de 6,4mm non incluse dans les dimensions E & H
Voir ci-dessous pour la dimension A2
Les dimensions sont en millimètres
Source : ASME B16.5 – 2007
DIAMÈTRE INTÉRIEUR EN FONCTION DES ÉPAISSEURS – A2
| Nominal Bore | SCH10S | SCH40S | SCH80S | SCH160 |
|---|---|---|---|---|
| 1/2″ | 17.1 | 15.8 | 13.9 | 11.8 |
| 3/4″ | 22.4 | 20.9 | 18.8 | 15.6 |
| 1″ | 27.8 | 26.6 | 24.3 | 20.7 |
| 1 1/4″ | 36.6 | 35.1 | 32.5 | 29.5 |
| 1 1/2″ | 42.7 | 40.9 | 38.1 | 34 |
| 2″ | 54.7 | 52.5 | 49.2 | 42.9 |
| 2 1/2″ | 66.9 | 62.7 | 59 | 54 |
| 3″ | 82.8 | 77.9 | 73.7 | 66.7 |
Les dimensions sont en millimètres
Source : ASME B16.5 – 2007
